Job Positions:
- Lead Machinery Engineer | EXXON MOBIL
- Lead Electrical Engineer | EXXON MOBIL
- Lead Instrumentation & Control Engineer | EXXON MOBIL
- Lead Pipeline Engineer | EXXON MOBIL
- Lead Civil Engineer | EXXON MOBIL
- Lead Piping Stress Engineer | EXXON MOBIL
Lead Machinery Engineer | EXXON MOBIL
Job description
- Supervise and manage project engineering design activities according to contract requirements and project objectives.
- Support and cooperate project’s team in defining the calculation, sizing and the design of the different Equipment.
- Manage and draw up Equipment Specs: Pumps, Compressors, Electromechanical Equipment, etc.
- Ensure correct consideration and application of technological requirements in all project phases up to the handing over of the plant to the Client
- Control and manage the quality, the costs and the timing of the subcontracted activities ensuring the compliance with project scheduling and goals and with contract requirements
- Validate and analyze technical documentation and identify possible improvement areas in terms of cost/time optimization
Skills and Experience
- Experience in Epc project.
- Minimum of 5 years’ experience is required.
- Fluent in English
- Minimum of 5 years’ experience is required.
- Fluent in English
Lead Electrical Engineer | EXXON MOBIL
Job description
- Selection of best technical / economical solutions and products for electrical systems.
- Review of client’s technical documentation and control of subcontracted discipline engineering documents.
- Electrocal details design implementation on P&ID’s interfacing with other project specialists and designers.
- Electrical technical data sheets and technical evaluations.
- Engineering: Mounting sketches, Junction box wiring & Layout, Wiring diagram, Cable list, cable tray routing, Bulk material MTO list.
- Elaboration of bid offers for vendors.
- Electrical system overall design integrity and compliance with international standards, company guidelines and engineering best practices.
- Required in the design, specification and selection of switchgear, transformers, UPS systems, distribution system.
- Review of client’s technical documentation and control of subcontracted discipline engineering documents.
- Electrocal details design implementation on P&ID’s interfacing with other project specialists and designers.
- Electrical technical data sheets and technical evaluations.
- Engineering: Mounting sketches, Junction box wiring & Layout, Wiring diagram, Cable list, cable tray routing, Bulk material MTO list.
- Elaboration of bid offers for vendors.
- Electrical system overall design integrity and compliance with international standards, company guidelines and engineering best practices.
- Required in the design, specification and selection of switchgear, transformers, UPS systems, distribution system.
Skills and Experience
- A Strong knowledge and experience of Electrical systems LV HV, Oil and gas related experience.
- A Strong Leadership Qualities.
- 5 years experience on the job required.
- Good communication and interpersonal skills.
Lead Instrumentation & Control Engineer | EXXON MOBIL
Job description
- Shut-down ESD architecture design & Cause and Effect diagrams interfacing with other project specialists and designers
- Elaboration of bid offers for vendors
- Instrumentation and automation system overall design integrity and compliance with international standards, company guidelines and engineering best practices
- Telecomm system overall design integrity and compliance with international standards, company guidelines and engineering best practices
- Instrumentation automation and control systems concept design and detailed engineering design
- To review contractor instrumentation and automation and control system design
- Technical instrumentation and automation support to commissioning and production start-up
- Selection of best technical / economical solutions and products for instrumentation andautomation systems
- Review of client’s technical documentation and control of subcontracted discipline engineering documents
- Instrumentation details design implementation on P&ID’s interfacing with other project specialists and designers
- Instruments technical data sheets, specifications for the systems (DCS, ESD, F&G) and technical evaluations
- Engineering: Mounting sketches, Junction box wiring & Layout, Wiring diagram, Cable list, cable tray routing, Bulk material MTO list
- DCS Control System Narratives implemented by DeltaV Emerson system, logic diagrams, loop diagram, I/O list, Alarm list, Graphic pages
Skills and Experience
- 5-6 years experience on the job required
- Technical Qualification in subject discipline (ONC min).
- Sound knowledge and experience of ESD, F&G, PSD, PLC's logic, control systems e.g. DCS.
Lead Pipeline Engineer | EXXON MOBIL
Description
- Implementing the pipeline actions in the quality plan for project
- Ensure that the pipelines installed in the project are safe, work and can be installed with locally or regionally available resources.
- Manage and design and execution of pipeline/headers engineering project for Project, including Detailed Design, construction and commissioning, in full accordance with Company's HSE, technical and quality requirements, and on schedule and within budget.
- installing and Designing of GRE in compliance with Contract requirements.
- Adopt the leanings into the project.
- Achieve the Project objectives and deliver the project on schedule and budget.
- Effective management of project interfaces.
- Education and motivation of the entire workforce throughout the project duration to obtain full buy-in to the HSE policies and thereby achieve set HSE targets.
- Manage potential execution phase project risks and uncertainties and take proactive mitigating measures to reduce the impacts on the project execution plan.
- Engage the Operations team to ensure a high level of operational readiness and flawless commissioning, start up and handover of the new facilities.
- Review of design deliverables and resolution of review actions within the agreed time frame
- Visits of vendors to ensure compliance with company/project specifications and good industry practice
- Visit pipeline construction activities in the field to ensure compliance with company/project specifications.
- Ensure as built documentation, drawings, close out reports, operating and maintenance manuals are prepared and entered / handed across to the relevant parties.
- Conduct regular interior site visit at project sites.
- Ensuring compliance of procurement with specifications in a very difficult market.
Skills and Experience
- A University graduate in a mechanical/pipeline engineering or related discipline.
- Extensive experience in Pipeline procurement , design and installation.
- Knowledge of CS pipeline and GRE fabrication, construction and design
- Able to work with the team to find engineering solutions that support the business needs , whilst not jeopardizing technical integrity.
- Proactive and responsive to project needs
- A Relevant degree or appropriate experience
- An Excellent communication skills
- An Excellent written and verbal communication skills
- A Knowledge of Primavera P6 and spreadsheets, with database capability would be an advantage
- A pro-active approach to solving problems and getting the job done
Lead Civil Engineer | EXXON MOBIL
Description
- Preparation of Civil Underground Drawings / System in accordance with EPC Technical Work Practices and Client standards, Plot plans and latest Vendor Data
- Understand terminology used for different types of systems, how they fit into a overall coordinated scheme design and environmental issues that need to be addressed
- Support development of a 3D model in an integrated solution to all drainage systems
- Be conversant with developing complete MTOs, plus the preparation and management of purchase requisitions
- Checking of drawings and models in accordance with EPC Technical Work Practises, EPC standards and Client standards, Plot Plans and latest Vendor Data
- Development of qualification to support AMUSE material handling
- Coordinate with other EPC affiliated offices with respect to workshare practices
- Keep abreast of the project strategy and key drivers, participate in Model Reviews as at when required and report changes to the Lead Designer/Lead Engineer
- Fully conversant with the principles of design of gravity fed underground drainage systems and flood systems
- Familiar with how Oil & Gas Clients undertake the underground system design in such manuals as SAES, DEPPs, GPs and other similar documentation
- Conversant with design of storm drainage systems (open and closed systems), gravity contaminated systems, pressurized contaminated systems
Skills and Experience
- Engineering degree, ideally in a relevant discipline
- proven strong character and self-motivated individual
- A Proven ability to engage in effective dealings with both client / owner and detail design contractors
- Must be able to work with the minimum of supervision and be technically strong
- Good understanding of the design of underground design systems to recognized national and international standards
- An Experience in a similar position, preferably on an oil / gas project
Lead Piping Stress Engineer | EXXON MOBIL
Description
- Check the suitability of the supplies concerning the piping material.
- Participate to Stress analysis
- Issue the stress analysis report.
- Participate to Support analysis
- Issue the Support List and the Piping Support Material Take Off.
- Issue the purchase documents for special supports.
- Manage, supervise project engineering design activities according to contract requirements and project objectives.
- Support the Estimate Office in the preparation of the most significant and important proposals with high plant engineering content.
- Elaborate the Piping isometric plans (definition of weldings and construction spools), optimizing them for the execution of the workshop activities and hydraulic tests, defining possible additional material that may be needed.
- Participate to Stress analysis
- Issue the stress analysis report.
- Participate to Support analysis
- Issue the Support List and the Piping Support Material Take Off.
- Issue the purchase documents for special supports.
- Manage, supervise project engineering design activities according to contract requirements and project objectives.
- Support the Estimate Office in the preparation of the most significant and important proposals with high plant engineering content.
- Elaborate the Piping isometric plans (definition of weldings and construction spools), optimizing them for the execution of the workshop activities and hydraulic tests, defining possible additional material that may be needed.
Skills and Experience
- A Minimum of 5 years’ experience is required.
- An Experience in Epc project.
- Fluent in English.
- An Experience in Epc project.
- Fluent in English.
Click any of the position to apply
No comments:
Post a Comment